| Field instrument calibration capability |
| Description | Range |
Method |
|||||||||||||
| Pressure transmitter |
-1 - 1,000 bar |
Comparison with Pressure calibrator & Hart com. |
|||||||||||||
| Pressure switch |
-1 - 1,000 bar |
Comparison with Pressure calibrator & Hart com. |
|||||||||||||
| Temperature transmitter | -90 - 1,200 oC |
Comparison with Dry block calibrator & IPRT |
|||||||||||||
| Temperature switch | -90 - 1,200 oC |
Comparison with Dry block calibrator & IPRT |
|||||||||||||
| Temperature sensor | -90 - 1,200 oC |
Comparison with Dry block calibrator & IPRT |
|||||||||||||
| Flow meter | 5 ml/min - 280 l/min |
Comparison with Standard mass flow |
|||||||||||||
| Flow transmitter | 6 ml/min - 280 l/min |
Comparison with Ultrasonic flow meter |
|||||||||||||
| DP transmitter | -1 - 1,000 bar |
Comparison with Pressure calibrator & Hart com. |
|||||||||||||
| Safety vale | -1 - 1,000 bar |
Comparison with Pressure calibrator & Hart com. |
|||||||||||||
| Level switch | 0 - 100 % |
Comparison with Pressure calibrator & Hart com. |
|||||||||||||
| Level transmitter | 0 - 100 % |
Comparison with Laser tape measurement |
|||||||||||||
| Control valve | 0 - 100 % |
Comparison with Process calibrator |
|||||||||||||
| Solenoids valve | 0 - 100 % |
Comparison with Process calibrator | |||||||||||||
| Pofitional control vale | 0 - 100 % |
Comparison with Process calibrator |
|||||||||||||
| pH/ORP couductivity | All range |
Comparison with Buffer solution |
|||||||||||||
|
Power transducers & Indicator |
All range |
Comparison by Multi-product calibrator |
|||||||||||||
| Signal conditioner | All range |
Comparison by Multi-product calibrator |
|||||||||||||
| Digital control | All range |
Comparison by Multi-product calibrator |
|||||||||||||
| Vibration switch / Sthock pick-up | 0-100 mm/s2 / 0-500 Hz | ISO 5347-12 : 1993 |
|||||||||||||
| Hydro test | 0 - 1,000 bar |
Comparison with Pressure calibrator |
|||||||||||||
| Chemical calibration laboratory capability |
| Description | Range | Method | |||||||
| pH meter | 4, 7, 10 pH | BS 3145-1978, BS 2586-1979 | |||||||
| Conductivity meter | 84, 1413, 12880 ms/cm | OIML R68-1985 | |||||||
| Turbidity meter | 0.01 - 1000 NTU | EN ISO 7027 | |||||||
| Hydrometer | 0.5 - 1.6 g/cm2 | ASTM E126:1992 | |||||||
| Viscometer | 50-5,000 mPa.a (CPS) | ASTM D446, ISO 3104,ISO 3105 | |||||||
| UV spectrophotometer | 198-650 nm | ASTM E 2056-04:2010 | |||||||
| Alcohol meter | |||||||||
| Refractometer | |||||||||
| Gas detector | |||||||||
| Lux meter | |||||||||
| UV meter | |||||||||
| Colorimeter | |||||||||
| Color spectrophotometer | |||||||||
| Vibration meter | |||||||||
| Grind meter | |||||||||
| Salt spray tester | |||||||||
| Frod cup | |||||||||
| Sound meter | |||||||||
| Patical counter | |||||||||
| Beaker, Pipette, Burette | ASTM E542-2001 | ||||||||
| Volumetric Flask, Cylinder | ASTM E542-2002 | ||||||||
| COD, BOD | |||||||||
| Torque & Force calibration laboratory capability |
|
Description
|
Range
|
Method
|
|||||||
| Screw torque driver | 0 - 20 N.m. | ISO 6789-2003 | |||||||
| Torque wrench meter | 0 - 1,500 N.m. | ISO 6789-2003 | |||||||
| Air torque driver | 0 - 50 N.m. | ISO 6789-2003 | |||||||
| Air torque wrench | 0 - 50 N.m. | ISO 6789-2003 | |||||||
| Setting torque wrench | 0 - 1,500 N.m. | ISO 6789-2003 | |||||||
| Torque gauge | 0 - 20 N.m. | ISO 6789-2003 | |||||||
| Torque calibrator | 0 - 1,500 N.m. | ASTM D 3474, BS 7882:1997 | |||||||
| Digital torque tester | 0 - 20 N.m. | ASTM D 3474, BS 7882:1998 | |||||||
| Force gauge (Digital/Analog) | 1 mg - 100 kg | Comparison with standard weight | |||||||
| Tension gauge (Digital/Analog) | 1 mg - 100 kg | Comparison with standard weight | |||||||
| Hardness tester | 0 - 100 Scale | JIS K 6301, JIS S 6050, ASTM D2240 | |||||||
| Durometer / Rubber hardness | 0 - 100 Scale | JIS K 6301, JIS S 6050, ASTM D2240 | |||||||
| Push - Pull scale | 1 mg - 100 kg | Comparison with standard weight | |||||||
| Tensile tester | 0 - 5,000 kg | ISO 7500-1 | |||||||
| Universal testing machine | 0 - 5,000 kg | ISO 7500-1 | |||||||
| Dimension calibration laboratory capability |
| Description | Range | Method |
| Vernier caliper | 0 - 1,000 mm. | JIS B 7507 : 1993 |
| Micrometer | 0 - 150 mm. | JIS B 7502 : 1994 |
| Dial gauge | 0 - 50 mm. | JIS B 7503 : 1997 |
| Dial thickness gauge | 0 - 50 mm. | JIS B 7503 : 1997 |
| Dial test indicator | 0 - 5 mm. | JIS B 7533 : 1990 |
| Bore gauge | All range | JIS B 7515 : 1982 |
| Height gauge | 0 - 1,000 mm. | JIS B 7517 : 1993 |
| Pin gauge | 0.1 - 50 mm. | ISO 286-1(E) : 1988, EA 4/02 |
| T - wire | 0.1 - 50 mm. | ISO 286-1(E) : 1988, EA 4/02 |
| Plain plug gauge | 0.1 - 200 mm. | ISO 286-1(E) : 1988, EA 4/02 |
| Plain ring gauge | 1 - 250 mm. | ISO 286-1(E) : 1988, EA 4/02 |
| Thread plug gauge | M1 - M250 | JIS B 0261 (M), EA 10/10 : 1999 |
| Thread ring gauge | M3 - M250 | JIS B 0261 (M), EA 10/10 : 1999 |
| Taper gauge/thread & plain | 0 - 50 mm. | JIS B 3301 : 1989, EA 10/10 : 1999 |
| Three - point micrometer | 6 - 150 mm. | DIN 863-4 : 1999 |
| Can seam micrometer | 0 - 13 mm. | JIS B 7502 : 1994 |
| Radius gauge | All range | Comparison with Video microscope |
| Feeler gauge | All range | JIS B 7524 : 199 |
| Steel ruler | 0 - 2,000 mm. | JIS B 7516 : 1987 |
| Steel tape | All range | JIS B 7512 : 1993 |
| Textile tape | All range | JIS B 7522 : 1993 |
| Standard thickness foil | All range | Comparison with ULM |
| Coating thickness gauge | 0.01 - 15 mm. | Comparison with Standard thickness foil |
| Ultrasonic thickness gauge | 0 - 100 mm. | Comparison with Standard gauge block |
| Universal bevel protractor | 0 - 360 o | BS-1685 : 1951 |
| Bevel protractor | 0 - 360 o | BS-1685 : 1951 |
| V-Block | All range | JIS B 7540 : 1972 |
| Jig fixture gauge | 0 - 300 mm. | Comparison with Video microscope |
| Roungness tester | 0 - 50 mm. | Comparison with Precision roundness specimen |
| Surface roughness tester | 0 - 50 mm. | Comparison with Precision roundness specimen |
| Granite surface plate / Iron | 0 - 9 m2 | JIS B 7513 : 1992 |
| Profile projector | 0 - 300 mm. | JIS B 7184 : 1972 |
| Measuring microscope | 0 - 300 mm. | JIS B 7153 : 1995 |
| Universal length machine | 0 - 600 mm. | Comparison with Standard gauge block |
| Height master | 0 - 1,000 mm. | JIS B 7517 : 1993 |
| Gauge block | 0.1 - 100 mm. | JIS B 7506 : 1997, ISO 3650 |
| Long gauge block | 0 - 600 mm. | JIS B 7506 : 1997, ISO 3651 |
| Precision square | 0 - 1,000 mm. | JIS B 7526 : 1997 |
| Angle gauge | All range | Comparison with Video microscope |
| Sieve | All range | ISO 3310-1 to -3 |
| Holtest | 6 - 150 mm. | DIN 863-4 : 1999 |
| Glass Scale | 0 - 300 mm. | JIS B 7541 : 2001 |
| Mass & Balance calibration laboratory capability |
|
|
|
